Good Morning and Happy Mothers Day!!! Peter I would be glad to try to help you get a cutter. Just e-mail me and we will try to see what is the best way. I'm in Alaska but I don't think that will make any difference. The costco here has them.They are about $39 and there is no tax in Anchorage! They aren't open yet as it is only 9:55 a.m. Well am off to church will ttyl.....Sharon

Hi Melissa, here's the post from Debe about AOL ads. Happy Mother's Day to all the moms. Helen Debe (Debr53@aol.com) Subject: AOL POP-UPS User's IP Address: 152.163.204.5 April 27, 1998 (12:41 PM PDT) This is something AOL wont't tell you. How to get rid of all those stupid ads that pop up everytime you log on or go into certain departments. 1. Click keyword and type in "Marketing Preferences", and hit go. 2. Double click on the menu where it says "Pop Up Preferences" a new screen will come up. 3. Look in the lower right hand corner of the screen and you will see a small box that says "If you prefer not to receive any pop up ads" Click on the box. 4. A screen will appear that says you will not receive any more pop ups. Just click okay. AOL will lose money if people don't see the ads, so that is why they don't want you to know you can cancel getting these messages. Debe

Hi Janet, what "upgrade" are you talking about? Are you referring to patch 4.01 on top of this chat room? Then it is not an upgrade, simply a patch that will correct a few errors in the original installation of PMG. And I have never heard of a warning about a certificate, even I downloaded the patch several times on different computers. Maurice.

I just tried to download the upgrade and got a message when I almost completed it that it did not have a certificiate and may not be safe to run. So I didn't finish the downloading. Why would a company like mindscape note get the needed certificiates needed to asure us they were safe to use?

I just checked;...http://www.geocities.com/join/freehp.html....this is the application and instruction page for web setup on their net.....It is free for personal sites....It also shows you how to set-up the page.

Mayre, glad I could help, even though it sounds like you figured it out for your self. "Oz never did give nothing to the Tin Man he didn't already have". (Eagles) <BG>. What the heck is a haiku?

Jill, I have an Epson 400. After reinking I not only had banding but little runs on the bottom of each letter I'd print. I would clean the heads 7 times, in between each cleaning I would go to PMP and make a page up of a wide fonts a couple inches high and do all four colors and just start to print them. Eventually I could see the runs and bands dissappear, as each would look right I would then eleminate that color and make more of the other colors. After seven cleanings and quite a few papers of letters it stopped ...Renee

Larry, I hope you are okay and off having a wonderful time with the family. We all miss you here though. *The hard drive is failing in my NEW computer. !@#$%^&*! I may disappear one of these days.

HAPPY MOTHERS DAY! debb

Oh no, Glenn's shorts ended up at Aunt Snoopy's, who has had her hair done and made an appt. to have a collagen injection in her lips to get rid of the lines, all in anticipation of her "admirers" next move. I could tell her that collagen injections make you look like you're still wearing fake lips left over from Halloween, but I don't want to get involved. Looks like your shorts are lost forever, Glenn. Hey, Happy Mother's Day to all who deserve it, especially you, Jocelyn!!

Hi Helga! Yes indeed, I phoned to this place, which is their local office here ins Sweden. First they told me that the rotary cutter was available in hardware stores. Then, when I didn´t find any, they said these were made in the U.S. for the U.S. market only. Blaahh! If anybody finds this one available for purchase from some site on the Internet, pls let me know, will you? Or anyone running their own business might be willing to export to me. Who knows, maybe I can trigger a market for those cutters over here, he he... Have a nice day Helga. Peter :>)

Just reading through the Archive (Thanks Jim... that is a godsend for these busy weekend's!!) and I saw your mail... glad you liked the demo - how did I do which?? There's a page two that gives a bit of an explanation.... Regards, Stuart P.S. For those that prefer to email than post on here, my apologies if I've missed your mail... I've only just convinced my hotmail address to correctly gather the mail from my two accounts... If you're expecting a reply, please mail me again.... Cheers, Stuart

You're welcome Stuart. I must say you did an outstanding design job! I'll bet your mom was amazed that you did that on the computer! I mailed mine off to my m-i-l. Sure hope it wasn't hot in Buffalo or she will have a melted mess. Come to think of it....Buffalo...don't think I have to worry about a heatwave there.<ggg> Right now I am working on 100 miniwrappers. Have them all printed. Am cutting them apart and taping them closed now. Am using that 'wonder' tape that rubber stampers use. Marty

Thanks again for the idea for the choccy bar wrapper... it went over a treat... my mum's a real daffodil freak, so it was topical, too... she had a good Mother's day, all in all!! Thanks Marty, Stuart

Well, I uninstalled PMP and reinstalled it. Still dumb grey boxes. So, I uninstalled my Canon rastor driver, which I liked and reinstalled Canon's Windows printing system, which I hate. My PMP prints fine now, but Micrograpx Draw 6 (which I also really like a lot!!!) doesn't. I thought their recent patch might have cured the couple of problems in that, but it didn't. Read that Canon is supposed to have some new drivers in June. I hope so. I hate having to make choices like this. My printer isn't even a year old yet, so I can't really justify buying another one - unless I want to trash my marriage and I really don't want to do that. LOL. Maurice, Larry, Glenn - can you think of any other solution? Thanks for listening. Marty

Many thanks to you Glenn for all of your help. Your words of encouragement are very much appreciated. I feel like there is some much still to learn...but I'll take it one project at a time. And thanks to everyone here for being so friendly and helpful....Melissa

Could someone post how to stop ads on AOL....I would like to pass this on to my mom....Thanks Melissa

I can not get any of my art cd's to work either any suggestions?

Maurice, thank you so much. It worked and I can even use CD #3 now. I was so frustated today I went out and bought Print Artist 4, what a let down after using PMG. I've been usint PM since version 1 on floppy. Been lurking here for about a month I knew someone here would be able to help me. Thanks again.

Jill, I found some disturbing news in the "Usenet Newsgroup." Here are a couple of direct quotes:.... "Re: Epson Stylus Color Black Banding Did you know that you need to switch the printer off after 3 head-cleaning cycles - it is programed to do nothing after 3 - despite sounding like the cycle is working. I had to do about 3 sets of 3 to get mine going (under the directions of the Epson telephone team)."......"One caveat: I've found that Epson's cartridges refill well once or twice, but beyond that it becomes increasingly likely that a refill just plain won't "take." I therefore don't bother even trying past two refills."....Hopefully Larry can shed some light on our problems. I'm out of here for the night; so good night to all.....Helga=^..^=

Peter, have you checked with the following place regarding finding a rotary trimmer?...Fiskars Sverige AB Ringtrastvägen 4 s-591 37 Motala Sweden 46-141-48000.....Helga=^..^=

Just about any answers to printer problems can be found at "Usenet Newsproup." I got there through: http://www.epson.com/connects/instans/newsgrp.html, then clicked on: General Printer Newsgroup (comp.periphs.printers).......Larry, I hope your ticker is not given you any more problems.....Helga=^..^=

Haven't been able to get here much but I must say this chat room has to be one of the best places in the world to go to if you need a good laugh. Feeling sad because kids just left and decided to see whats going in the chat room and All of a sudden I see that Glenns shorts are missing,really need the rest tonight but know I will be up early to see where they ended up!!! This is really getting interesting. I think it's a never ending saga. Thanks all for making our days brighter! Happy Mothers Day to each and everyone of you. Love and best, Myra

Dear David, I do concert programs, orders of worship, programs for Scouting ceremonies, etc. as half fold cards. This is a comfortable size to hold and read, gives you plenty of room to add artwork if desired, and you can choose which pages to use, since all four are accessible. One caution: When working with a poster you know that although your graphics or text go all the way to the edge, there will be a margin left on all four sides. However, with a half-fold card there is no indication of the margin which will be left in the center of the inside. (We call this the gutter.) So always move your work slightly to the outside edges and print one out before adjusting all the details exactly. Lynn

JustMe - Thanks. I followed your advice without actually reading it. Was so busy working on the card, I didn't get back to PM Live until now. It's ll:l2pm here. Anyway, the card turned out fine. Front, horizontal - has graphics, etc. Flip side, vertical - has graphics, points re. service, etc. and there was still room for a haiku in tiny print. Cheers for synchronicity! It worked. Mayre

Hi Gail, when you install PMP, and it proposes C:\PMW as the install directory, click on CHANGE and type in, for example, C:\PMP40. Then it will install without trouble. Maurice.

May I also add my congratulations to the long list you've accumulated. The babies are beautiful. We had company all day today and I had everyone at the computer oohing and ahing over the little ones. Looking forward to more pix and can't wait to hear their names. Michelle

Well, I have given up on this program. I've never been able to open ART CD 3!!!! Tech support keeps e-mailing me things to but to no avail. The Final straw was when my instructions told me to delete PM all but yellow folders. I did this and now I can not reinstall. Its telling me can't find resource DLL (Q:\PMW32\PMWRES32.DLL,00000006). I tried to reinstall my PMG it tells me I'm performing a illegal operation. I GIVE UP.

I just want to tell Stuart thank-you for posting the tgrad. I just love it. I am getting the button maker should be here is about 2 weeks. I'm already designing my buttons the backgrounds are absolutely fab. Also I want to thank Maurice for helping me to make my banner for my mom. Now that all sounds just like th academy awards. I got an e-mail with the cutest little animated dog. Is there a way to copy and use it? .....Sharon

It came! You weren't kidding (label). GOSH! I almost had my eye put out. LOL

Jean, Just in case Helga didn't send you the info, here's her steps to e-mailing a card. I used her instructions and they worked like a charm. I created my card, had it in the workspace, then launched the browser, then to step 3. Thanks again, Helga, for your help........"OK, boys and girls. Today I mailed out several PM Online cards to see how it would work out. Most of the people were non-PM users. So far, the people who replied all got their cards and had no problems viewing them. Here is what I did...... Sender, do the following:.. 1)Create your card.(If you want to use it at another time, save the card. Retrieve it from "Your Projects") 2) Have your card in the work space when getting ready to mail out. 3) Click on "File.".... 4) Click on "Send Online Greeting." 5) Fill out the "Internet Card" which will appear on top of your card (enter your email address and the email address of your recipient) 6) Launch your Internet Browser to establish an Internet connection 7) After filling out the "Internet Card" and being connected to your Internet Browser, click "OK" on the "Internet Card." 8)Congratulations, your card is on its way to the recipient. 9)Within a few minutes after mailing your card, you will get an email notification from PM that the card has been sent. To read the card, the Recipient should:.. 1) Highlight the web address given by PM...... 2)Copy the web address......... 3)Paste the web address into your browser input line...... 4)Press "Enter."......... 5) Follow instructions given by PM........ 6)Enjoy your card.......... Sorry about the long posting, but if it helps just one person, it was worth it.....Helga=^..^= "

Congratulations, Michael and Jocelyn, on the three beautiful additions to your family. What a pleasure to be part of your lives, even just through cyberspace. Helen

Let's see. Priority Mail..should be arriving at your place anytime now. Remember the label. Be sure to let us know how things turn out. Jill

Are you sure that postman was holding a box or just a sign? I'll be looking forward to my Priority Mail.

Glenn, Glenn, Glenn, I was able to brighten some scans from magazines and such to the point that no background was printed then increase the contrast so the type showed up fine. *Your shorts?! Oh no! I thought YOU had them. LOL

Now, I know I haven't been around much lately. But the last time I remember it had something to do with SOCKS. Now, come to find out, SHORTS are also involved. This mystery is deepening. However, I did see a clue. Upon returning from my Saturday walk by the bay, the mailman stood with a box labeled "SHORTS, OPEN AT YOUR OWN RISK." Glenn, I have no idea what you are up to but I think it's not computing. I quickly gave the postman Daisy's EMail address and told him that she is in charge of the missing items of clothing. Cheers. Jill

Mayre, you could do it as two separate projects. Design the front, in one, then the back in another. Print design one (front), flip the page over, and print design two (back). Come on Helga, no holding back, what did you do, to make everyone ROTFLOL?

To Maurice and Stuart, Thanks so much for your help in my FINALLY getting a successful download, this one "took" after the last full installation was giving me problems and I decided to uninstall it. Gave it one more try, today, and it'w working. Looks like a lot of fun and will be very useful. Eleanor.

Daisy Daisy Daisy if the cake and chart don't have transparent backgrounds it can't be done. The chart at least has to be transparent to allow the cake to show. Did you find my shorts?

Congrads, to Jocelyn and Michael, the babies are beautiful... As my son would say two more and you have a full hockey line.... Jocelyn Happy Mothers Day to you.... Melissa, I just read parts of what you are trying to do can you scan the cake save it as a bitmap then open it in PMW and if you go to attributes you can change it to about a 15 or 20% gray and that will allow you to put your chart over top of the cake? hope that helps or works... Happy Mothers Day to all of you wonderful Moms out there especially the ones who have been searching for all of the lost socks!!!! Glad summer is coming soon we can all wear sandles... Doreen

Hi Michael and Jocelyn! CONGRATULATIONS!!! I´m glad that everything went well and that the 3 little ones are healthy & all. You must sure be proud all of you! Went to your site and saw the pics. Am amazed that you have time with all these postings and uppdatings in the middle of yr wife´s delivery. How many assistants do you have? Anyway, best of luck!!! Peter

To create a shortcut to Michael's site in MSIE4.0 Favorites folder. First highlight and copy the address Glenn gave. Click on Favorites (on the menu bar), Organize Favorites, Right click on the white window, Select New, Shortcut. Where it says "Enter command line" paste in the address. Click Next. Give it a name. Click Finish.

On 2nd thought, print the chart first...? 3rd thought - Since it is a scanned image you might be able to use the photo enhancer to lighten the image so the background is white and then increase the contrast so the text shows up. I used to do this in Ulead iphoto when I had it installed.

Print the Cake. Put the paper back in the printer the same way and print the chart. You may want to lighten the cake graphic so the chart shows over top of it.

Hello All! Thanks for e-mailing me. PC and phone are tied up most of the time, but I sure was happy about those who got through. New problem ~ have made a nifty business card for myself, but want to put some features on the back. Possibly use a point system. Or would settle for a haiku with a small graphic. Anyone believe that's possible. I'm using Avery cards - two sided. Best M.

For those of you who are having trouble getting to things on Michaels site you need to access it at http://members.xoom.com/mbgoldberg/

Do you think the censor makes type errors when it translates our messages. It couldn't possibly be ME....(G)....S

Hi Milissa, I think what is happening is the same thing that happen to me. When I scan a picture in if it isn't the whole pape then the rest become a white background and it isn't transparent. What I have to do it take it to a photo program and crop out everything except what I want to show up. Some of these programs also have a transparent choice. I don't know if this is what is happening to you but it sounds simular to what happen to me....Thanks Sharon....

CONGRATULATIONS, MICHAEL & JOCELYN...Just got to the computer today and found Daisy's direct URL to the pictures. I am so moved, they are so beautiful and all such a good size. We have three sons, but they were born one at a time....can't imagine the joy at seeing three at once! Will be waiting for more of those pictures, Michael......Eleanor

I went all the way back to the beginning of this page and couldn't find the person who wanted to know about adding custom colors to the tool bar in the color section. When you go to custom color it is a new time each time but if you select all the colors you might want to use a one time they will all be added at the bottom when you go back again it will reset to the first one again but the others will still be there.... I hope this is clear but if you try it you'll understand better... Thanks Sharon

Daisy, I don't think that what I want to do will work. I thought Glenn's idea would work but the chart blocks out the cake underneath. I can see a slight grey color that tells me that scanning my chart is not going to work unless I can make everything else transparent. Does this make sense? I need this done tonight and I could skip it all together and just type up something simple but I want to do it if it is possible...Melissa

Tracey Open a new project (card, poster, etc.) Click on the Picture Icon. In the Art Gallery put ALL in each of the windows. Then type the words GRADIENT BLEND in the search window and click on FIND NOW. You will be presented with several gradients. (Additional search words are Center Out, Outside In, and Outside in Rainbow) These are not brought up under gradient blend and will have to be entered in search separately. Center out is most useful. Remember that color is not important. You need to click on the one that has the effect you want to create. Then click on SELECT. The gradient will then appear in your project. Size it to fit the page.(or beyond)............. To change the color click on the paint can. Select a color from the palette. Then click on MORE. You will get a rainbow palette with the color you selected as the starting point. You can move the cross hairs to any color you like. Move the slider on the right side to lighten the color. This is to make it more usable as a background. Experiment to get just the color you want. When satisfied click on OK. The color possibilities are virtually limitless. .......................

If anyone has sent me email in the last few days - my ISP is really goofing up. Just got your message Glenn and it looks like it was sent May 7!! I sent myself a message from hotmail at work yesterday morning at 8am and I just now received it! So apologies to anyone I haven't answered. Please resend. Marty

I'm so exasperated with my Epson 600 #$%$#$%$#$%. My patience is running thin %$@$%#!! As with Helga, I've once again gone through the motions to reink the color cartridge. I am only able to get ONE reinking from a cartridge. When it is refilled the second time, using the exact same steps, I either get nothing or banding. This is with topping off the cartridge at the one quarter to one half mark. It happens with both the color and the black. Several (eight to ten cleanings does not solve the problem) and only uses up more ink.

I am trying to make up an invitation for my husband and he wants the panel type. That is four on a page type. I am new to this type of thing. If anyone could tell me how to do it I would appreciate it. All the invitations I see are just one on a page. I need to know as soon as possible as he needs to get them in the mail.

Hi Friends, and particularly Helga if I remember correctly. I am still trying to get hold of the archives which include the dates of April 15th through 18th. I inadvertently sent them off to lost file Heaven and have not been able to retrieve them. What I desperatly need right now are the instructions which someone (Helga, I think), posted for sending a PM online card. I am desperate to get one in the e-mail to a person who will probably not see much of summer, much less another Mother's Day. But those instructions are the ones lost. If anyone can help me out with those ASAP, I would be SO appreciative. Thanks good folks. Jean

Dear Jocelyn and Michael: I am adding my congratulations to those other PM chat room who have been following your every move. I am delighted that everything is OK. Problem 1: I am trying to make a banner for my daughter's 5th-grade classroom wall. She wants a woodgrain back and a late 1800s font (I used Rodeo) to make the sign for the store window. The problem is that the woodgrain background I have a left border background, with only the left the woodgrain. So I opened a banner and repeated the woodgrain several times horizontally, each time covering the yellow in the rest of that image. Then I placed the sign wording on top of that. When I went to print a trial tile, the sign text comes out fine, but there is no background. The image is quite a bit higher than could be accommodated within the upper and lower banner margins. I didn't think that would be a problem. I have been sitting here for almost 4 hours now, trying different things. If I alter the % down from 100%, it will print a woodgrain background, but only about 2 inches high. I do want the text to occupy a good 7-1/2 to 8" of the vertical banner margins, but I am running out of time on a VERY BUSY DAY already. In order to keep the proportion, I want it to be 1 tile high in order to fit properly in her "window" she is constructing. But to do that, it wants to make it 22 tiles across. I would be delighted to just stop the printer when I get to the place where I have all of the text printer. But she can't handle anyting more than about 3-1/2 to 4 tiles wide (which isn't a problem: Her text fits fine within those dimensions. I'll have to ask you about the second problem later. I need to get this one straigtened out right away! Thanks good folks for trying to help. Most cordially, Jean

Dear Michael and family,been gone so just heard about the safe arrival of your precious babies,Congratulations to the whole Goldberg family, we are all anxious to know their names. Hope Jocelyn is resting well now.(and you too)Best, Myra

That #@%! mess is click "M O R E" I have no idea why it got censored.

Click on the background or graphic to select it. Click on the color button (left side of work area, looks like a bucket pouring out paint) C#$%!ORE. At the far right of the window that opens is a little black triangle beside a color bar. Move it up the bar to lighten. Click OK.

Sorry about the double....S

I found a site for a much less expensive machine and it's what I think I'm going to order. It's the badgeaminite at http://www.badgeaminit.com ....I think this would be great to use with PM . I'll let you know when I get it how it works....Thanks Sharon....P.S. Larry I finally just gave up on trying to e-mail those papers to my husband... Sent them with mailboxes etc....S

I found a site for a much less expensive machine and it's what I think I'm going to order. It's the badgeaminite at http://www.badgeaminit.com ....I think this would be great to use with PM . I'll let you know when I get it how it works....Thanks Sharon....P.S. Larry I finally just gave up on trying to e-mail those papers to my husband... Sent them with mailboxes etc....S

Hi Michael, my most heartfelt congratulations!--- And WOW, to celebrate, the chat room upkeepers collaborated and put the chat room width to "normal again." Thanks Mindscape Support! the bottom scroll bar is gone. Maurice.

Jocelyn and Michael, congratulations on your newest little ones. Keep the pictures coming.....Helga =^..^=

Two days ago, I refilled my Epson 800 color cartridge for the third time. With the use of a needle and syringe, I filled each compartment very slowly and let the cartridge sit for two hours before reinstalling it back into the printer. I ran it through the cleaning cycle three times, and the print output was fine. That same evening (10 hours after refilling), the output showed missing lines. A nozzle check revealed horizontal gaps in magenta and yellow. After three more print head cleanings, printing was all right again. Last night, the same thing happened: missing lines in output which were fixed by cleaning the print heads. Also, nozzle check showed horizontal gaps again in magenta and yellow. Any ideas on why the magenta and yellow colors seem to stop flowing? Any suggestion on how resolve this problem? I need to shop for a Mother's Day gift and will check back later. Thanks. BTW, the printer is fixed again, but I can't tell what was wrong. You good people would be ROTFLOL....L8R.....Helga=^..^=

I would appreciate if any one can explain to me how you can get a background color to go from dark to light. Secondly, does the photo enhancer work on backgrounds and borders? Help, please....I want to make a card

Wow, Michael,congratulations on the safe arrival of the babies. They are very big for triplets. I just found a new site for a button machine. There are several styles to choose from all the way up to commercial. It's http://www.usabuttons.com/ ...Thanks...Sharon

Welcome Mayre, your modem is working fine and this a chat room for friendly folks who use PrintMaster, graphics, desktop publishing and related hardware/software. Most of just post here and you have to return in a reasonable period of time for responses and answered questions and welcome suggestions….Larry

Need help! Someone kind, please e-mail me so I know this do-dad is working. Have been writing on a PC for umpteen years, but haven't a clue about modems, etc. . .

Michael and Jocelyn, so glad the babies are here and healthy. They look a good size too! I know your whole family is tired and excited, wish we are all closer by to help you out. But Grandma is there and that will be a tremendous help! Hope you and she are feeling much better. Oh, BTW, did you get to give Jocelyn that peck on the cheek before you ran out to give us the good news??? Thank you so much for letting us know so quickly. All of our best to your entire family.

Probably choosing "brochure" from the new project list would be the best bet. You can select 2, 3, or 4 panels and Tall or Wide orientation.

http://members.xoom.com/mbgoldberg/Trip3.html To go direct to baby pictures.

Hello... Does anyone know the best way to create a concert program in PrintMaster?

Hi Everyone! I have been gone for a while but I see I made it back in time for the triplets!!!! YIPPEE! Congratulations Michael and Jocelyn!!! Michael, a tip I learned from waaaay back. When you bring the babies home, they are showered with gifts, etc. Bring the other three children a gift also...it makes them feel good and not left out! I, too, need some help. Like Connie, I can't get an arrow or anything, I can only get the home page with no links. Help!!! I am dying to see the babies! I am sure they are beautiful like your other children. Michael, what are their names? It is good that their weights are so close to being the same....no 2 pounder. Can someone help me get to the pictures? ~Anxiously waiting~ Vicky~

Michael, Congratulations on the Babies.But I need help. I can't see the babies on your site. When I go to the main page I do not get a next button or arrow. So I can't go to the next page.But I'm sure they're beautiful just like the others.Now the fun begins!

Many best wishes to the Goldbergs and their new additions! It's so great of them to share their joy with the world! May their lives be as enriched as they have enriched ours!

Congrats to you and Jocelyn. Lets not forget Susannah, Deborah and Dainiel. Best of luck to you all. Can't wait to see more pics.

Sorry so slow getting back to you. Were you able to get the BD cake to print yet?

Hip hip hooray! Hip hip hooray! Hip hip hooray! Three cheers for the three new Goldbergs!!! Jill

Congratulations, the babies are adorable! You have been truly blessed. I'm glad everything went well and that all are healthy. Donna

Couldn't resist - Think of all the SOCKS they'll have to keep track of! ~L~

Just saw the photos, conrats to you and your family. What a prescious gift you have been given. Best of luck!

CONGRADULATIONS! Michael & Jocelyn, What beautiful and healthy babies you make. We should have known looking at the adorable other siblings. Give all extra love. You are in our prayers. What a wonderful expierence. debb

Many congratulations to Michael and Jocelyn!!! The babies are beautiful! Reminds me of a song (although it's about twins and called "20 Tiny Fingers"); It goes, "We've got cribs and bottles and bibs all around our 3 room flat. No time to see what's on TV, no place to hang my hat. But mom and I we both agree when all is said and done. We've got twice the blessings and we have twice the fun." ****Here's to you and THREE times the blessings & fun!!!

Congradulations Michael and Jocelyn. Thanks for posting the pictures so quickly, the boys are beautiful. May you, Jocelyn and family have many days filled with sunshine and happiness. Best wishes Sandi

Since I know you are going to have umpteen emails, I will say here that tears are in my eyes and a song in my heart for you and Jocelyn. I can't wait to tell the mama of our twin boys, Andrew and Christian, that there are three beautiful babies sharing a birthday with them!! May all your days be as joy-filled and exciting as they are today!! Love and hugs, Bev

Ya'll have got to go and check out the babies! Can you believe that he has had time to even think to do that?! They are so beautiful!! I admit I Awww-ed out loud. My husband said I best not get any ideas and that having the babies on there is dangerous because seeing them makes me want more!

Hi, folks - surprised you! Jocelyn & three healthy baby boys are all doing fine - 4 lbs 11 oz, 4 lbs 5 oz, 4 lbs 6 oz. You'll have to got to the website for photos, but Jocelyn delivered suddenly at 6:40 PM this evening. As it turns out, my website is the fastest way that I can get photos to all our friends & relatives. So after Jocelyn started to conk out after all the hoopla was over, I came back here & uploaded the photos I took with my camcorder. Only took 15 minutes or so. I was in the middle of updating my website with new printmaster stuff when Jocelyn called and away I went. Got there in time, but they weren't going to wait for me! The adventure begins!! Thanks for all the well-wishes! Michael & Jocelyn.

Wow! Thanks to all for caring and sharing notes about your furry pals. They have really brightened my otherwise dismal day. I feel like I have friends here, it's a good feeling! Non pet lovers can't understand how much they get to be part of the family - unfortunately, I have to include my SO in that group, but to his credit, he cried too when I had to bring her. Larry> now I know how YOU felt ... BTW did you get my E-mail THIS time???

Daisy, I had already tried what you suggested, I ended up donig what Glenn suggested. Maybe you can help with this...I have a picture of a B-day cake and my chart on top of that..it is printing right now and the cake isn't there...this is my first attempt as this kind of project.

Michael, congratulations, and thanks for notifiying the room on the way out the door. I hope that three or four minutes doesn't come back to haunt you 15 or 20 years down the road. Good luck, and best wishes to you, Jocelyn and the triplets.

Michael is pretty ingenious he may have a lap top and a cell phone:-) BTW Michael all the best. I shure hope all goes well. And good luck in the future. You are going to need it. I hope you make tons of money or maybe, win the lottery.

OK...who's the official one that's going to let us all know about the triplets, that is besides Michael? I can just see him now, last one is out, he leans over and gives Jocelyn a little peck on the cheek, and off to the computer he goes to jump on the chat and update his page. Linda, so sorry to hear about your little friend. I had to do that last July with Gin-Gin that I'd had since she was 3, she was 15 when I had to let her go. 2 days later, we saved another little one that had her D-day coming up in 3 days from then at the shelter. We hadn't planned to add to the family that quickly, but she needed a family and we needed a little furry one. It helped me get through the sorrow a little easier, having a little one to hold on to and catch my tears. Best wishes to you.

Oh, you're fast tonight. (Maybe too fast on the e-mail trigger. ~L~) Must be that those warm, cozy socks I sent are making you feel frisky.

Ok, did you try selecting what you imported, click on Arrange, then Position, Full Size? I don't know what else to do. I don't have Excel so that I can experiment with it myself. sorry

Hello Melissa if you have the project the way you want it in Excell, print it and scan it into PM Then you can right click on the graphic select Position then select full page. You might try this last part before you scan. It will probably work.

Hello folks. Michael is off to the hospital and we all know what that means. Diapers, bottles, feedings, dressings, holdings.....for THREE!!! Three cheers for you and the wife Michael. Come back and see us some time (tongue in cheek). Cheers. Jill

   ----- The following addresses had permanent fatal errors ----- <dbrinsfield@mci.com> Try again Debbie the address is wrong.